Brands
  • C.E. Smith
  • Lee's Tackle
  • Metal Creations
  • Taco Marine
  • Tigress

Lee's Swivel Base Stainless Steel Rod Holders RH5365

Lee's Swivel Base Stainless Steel Rod Holders RH5365
Lee's Swivel Base Stainless Steel Rod Holders RH5365 Lee's Swivel Base Stainless Steel Rod Holders RH5365 Lee's Swivel Base Stainless Steel Rod Holders RH5365 Lee's Swivel Base Stainless Steel Rod Holders RH5365 Lee's Swivel Base Stainless Steel Rod Holders RH5365 Lee's Swivel Base Stainless Steel Rod Holders RH5365
Brand: Lee's Tackle
Product Code: RH5365
Availability: In Stock
Price: $119.95

Available Options


* Cap's Angle:

Without a doubt, Lee’s swivel base rod holder is the “Ultimate Rod Holder” for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. The rod is more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip’s roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.

Swivel Base Rod Holders are available as Standard, Heavy Duty, Short, and Extra Long Tube models.

The Extra Long Versions of these rod holders are 4” longer than the standard length, allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface.

For the “Ultimate Installation” use Lee's stainless steel backing plates. Designed for Lee swivel base and heavy flush rod holders, they’re constructed from heavy gauge type 316 stainless plates and have built in safety eyes on both sides. Available in two models, the RH5900 accommodates 0 & 15 degree rod holders in gunnels up to 1-3/4” thick.

The RH5930 plate model accommodates 30 degree rod holders in gunnels up to 1-1/2” thick.

Both come complete with stainless bolts, locknuts and washers for a maximum strength installation.

             Model               Angle                Dimensions

Standard Swivel Base Rod holders

  • RH5365            Medium 30°         2”OD x 9” Standard Length Tube
  • RH5367V          Medium 0°           2”OD x 9” Standard Length Tube
  • RH5369H          Medium 15°         2”OD x 9” Standard Length Tube

Heavy Duty Swivel Base Rod Holders

  • RH575              Heavy Duty 30°     2-1/4”OD x 10-1/2” Tube
  • RH577V           Heavy Duty 0°        2-1/4”OD x 10-1/2” Tube
  • RH579H           Heavy Duty 15°      2-1/4”OD x 10-1/2” Tube

*Large Swivel Rod Holders for Standard Large Curved Butt Rods

Short Swivel Base Rod Holder - Short Tube

  • RH5165             Medium 30°          2”OD x 6-1/2” Short Tube
  • RH5167V           Medium 0°           2”OD x 6-1/2” Short Tube
  • RH5169H           Medium 15°          2”OD x 6-1/2” Short Tube

*Short Tube for Stand-Up Rods with Small Curved Butts

Heavy Duty Swivel Base Extra-long Rod Holders

  • RH575XL          Heavy Duty 30°       2-1/4”OD x 14-1/2” Extra Long Tube
  • RH577XL          Heavy Duty 0°         2-1/4”OD x 14-1/2” Extra Long Tube
  • RH579XL          Heavy Duty 15°       2-1/4”OD x 14-1/2” Extra Long Tube

*Large Extra Long Swivel Rod Holders for Standard Large Curved Butt Rods

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:




Fishing-Outrigger.com © 2018